ICT4D - Not all ICTs will help development

March 26, 2015
by
Benjamin Balder Bach

In FAIR Denmark, we've been learning by doing. One of the cornerstones in our project is to deliver cost-efficient educational ICT centres in countries where it's not affordable otherwise: And refurbishing ICT hardware creates not just a little more, but a lot more access to information and ICT education.

But does it also lead to development? This is another question, which is fundamental. At one end of the spectre, ICT can be seen as a tool for development, while at the other far end, it's seen as development itself. In either case, there's a firm belief that ICTs lead to development, thus we can dedicate our focus to our own experiences and how we can improve our practical delivery of ICTs that simply work and can be maintained in a cost-effective manner.

In February/March, we visited a number of centres set up in 2011. We wish to apply our new-found observations to keep elements in our model that work and replace the ones that don't.

Some of the routines that we are adjusting have to do with our collection and workshop activities at home, and some of them have to do with the abroad maintenance scheme.

Identifying equipment with a long life-span

The problem: An unacceptable fraction of the equipment from 2011 did not last 5 years. The explanation is of course different from computer to computer, and from screen to screen. The dust and the heat is harsher at a school in Malawi, but some equipment stands the test, and that's the kind of equipment we would ideally be sending.

The solution:

But do we waste computers?

No, the success criteria is to identify hardware that won't run for another 5 years and not to falsely identify hardware that can!! Furthermore, equipment that's deemed too old is taken apart for spare parts. Hard drives, RAM, graphics cards -- much can easily be picked and shipped for later usage.

Maintenance, maintenance... maintenance

Maintenance falls into two categories: The day-to-day maintenance conducted by the schools, and the technical maintenance conducted by technicians appointed by the local project.

Problem: There have been obvious faults in the way that equipment has been cared for. Broken windows that leak dust (Malawi and many other African countries are really dusty), lack of curtains, lack of cleaning, and bad initial setups causing usage to strain power and network cables.

Furthermore, we also need more frequent technical maintenance. It's no use to keep a computer alive for 5 years, if it's out of use for half the time. If there's the more or less common problems of a broken hard drive or memory block, a technicians should be available and able to move quickly. This is not the fault of any individual person, but we see the need for technicians to be dedicated to the single task of visiting schools and for schools to have a clear demand for maintenance.

The solution: Before setting up centres, FAIR and partners are now much more aware of the initial communication with the schools. These efforts are mainly manifested in a MOU - Memorandum Of Understanding. In the first project, responsibility of technical maintenance was the schools' after 1½ years, but in the next projects, the schools will cooperate and finance a unit at a university to provide this, while the economical capacity to establish an individual body is being sought out.

This should make responsibilities more explicit and ensure that resources are there, not just temporarily, but as a permanent structure.

Keeping functional hardware up while it's still working

The problem: Even though hardware may not be working, software failures may lead to useless workstations. In the Windows world, this is usually caused by viruses, but in the Ubuntu / Linux world, it's caused by the missing local presence of a capable technician.

The solution: Efforts have already been done to ensure that re-installing a workstation is a matter of a few key presses: Boot a computer from the network, select re-install, and then with no further efforts, the operating system and all of its software is back.

But we need to be better at spotting recurring issues at the same work station. This will in the future go in a locally stored technical log.

Procedures and manuals

The problem: Every time a new Danish workshop volunteer or abroad technician start, we refer to personal training, and loosely collected manuals. This causes different practices, not an optimal procedure.

The solution: Refurbishing hardware at the Danish workshop should be picked up from start to finish to ensure an optimal recovery of reusable hardware. Lots of great efforts have been done, but it's the last fraction of un-vacuumed motherboards and over-aged machines that we need to guarantee does not occur.

At the schools, we need to make sure that technicians have a manual to solve problems and efficiently setup centres. This will both ensure an easier deployment of new centres, and should establish a cheap and swift routine of maintenance visits to all the school centres.

And yet again, why not new hardware??

Yes, the question arises often, and we feel tempted to criticize other ICT4D efforts for being too focused on bringing the newest hardware. So let's imagine that we had lots of money.

We are not just refurbishing because we have to or want to: In any scenario, reusing resources should be a first-choice.

But we can learn and improve.

An Intranet for offline ICT Centres... and technicians!

Debating Internet.org

Back to blog index